Professional Pool Fence Inspections Adelaide
Expert pool fence compliance inspections with same-day certificates. Licensed inspectors serving all Adelaide suburbs.
Book an InspectionExpert Pool Fence Compliance Services
Our comprehensive pool fence inspection service ensures your pool barrier meets all South Australian safety requirements. With our team of licensed inspectors serving Adelaide and surrounding suburbs including Glenelg, Norwood, Prospect, and Burnside, you can trust that your pool fence will be thoroughly assessed against the latest safety standards. Need a full compliance check? Visit our pool compliance certificates page.
What We Check During Inspection
- Fence height compliance (minimum 1.2m)
- Gate self-closing and self-latching mechanisms
- Non-climbable zone requirements
- Gap measurements and compliance
Why Choose Our Pool Fence Inspection Service
- Same-day certificates for compliant pools
- Licensed and experienced inspectors
- Comprehensive inspection reports
- Serving all Adelaide metropolitan areas
Pool Fence Compliance Requirements
All pool barriers in South Australia must comply with the Development Act and Australian Standard AS1926.1-2012. Key requirements include:
- Minimum height of 1.2 meters for all pool barriers
- Self-closing and self-latching gates that open outward
- No gaps larger than 100mm anywhere in the barrier
- Non-climbable zone requirements on both sides of the fence
Pool Barrier Compliance Checklist
Use this interactive checklist to assess your pool barrier's compliance with AS 1926.1-2012 standards. This is a guide only - for a full compliance assessment, book an inspection with our certified professionals.
Barrier Height & Structure
Measured from finished ground level on the outside of the barrier. Must be maintained around the entire pool area.
The gap between the bottom of the barrier and the ground must not exceed 100mm. Surface beneath must be stable and not easily eroded.
Non-Climbable Zones
No footholds or handholds within the NCZ. Must be present on all barriers less than 1800mm in height.
Barrier Components
Any gaps between vertical members must not exceed 100mm at any point to prevent access.
No horizontal surfaces greater than 10mm in depth within NCZ unless sloped at 60° or more.
Gates & Access
Pool gates must swing outward (away from pool area) and have sufficient clearance to operate.
Gates must self-close and self-latch from any position without manual force.
If less than 1500mm high, latch release must be at least 1200mm above ground or 1000mm above highest foothold.
Windows & Access
Windows opening into pool area must be non-removably fixed to open max 100mm or have security screen.
Structural Integrity
Barrier must withstand 330N force (approximately 33kg) without breaking or permanent deformation.
Ready to Book Your Pool Fence Inspection?
Get your pool fence inspected by Adelaide's trusted professionals. Same-day certificates available for compliant pools.